 |
Hospital Beds and Examination Tables
Hi-Lo Intensive Care BedHospital Bed/Iron CotHospital Bed (ISI)Ward Care Bed - Flower PositionWard Care Bed - Semi Flower Position (Deluxe Model)Ward Care Bed - Semi Flower Position (General Model)Pediatric BedAttendant BedMetal Bunk BedExamination Table (ISI)Examination Table (General)Examination Cum Gyane TableObstetric Labor Table
Bedside Lockers / Tables and Bedside Screens
Wheel Chairs and Trolleys
Bedside Revolving Stools and Dustbins
Operation Theatre Equipments
Bowl Stands and Saline Stands
Foot Steps and Crash Cart
Hospital Garments and Blankets
Product Showcase View our entire section by only single click 
|
|
Hospital Beds and Examination Tables
We are fully committed to provide superior quality hospital beds which are very cost effective and ergonomically designed. Since these beds are meant for the hospitals therefore great care is taken while manufacturing them which as a result provide lots of comfort to the patient. The beds are manufactured using high quality stainless steel and mild steel. The measurements of the bed are produced keeping in mind the average human physique. We are offering the following types of hospital beds: |
View Enquiry Basket
 | Hi-Lo Intensive Care Bed Overall approximate Size:-
Sizes Available: 2250 mm (L) x 1015 mm (W) x 660 mm (H)
Strong and precise steel tubular framework with chariot type base and are mounted on 125 mm dia swiveling castors, two with brakes and two without brakes. Four section top of uniformely perforted press bent CRCA Sheet. Four separate screws for Trendelenburg and reverse trendelenberg adjustments, knee rest and backrest and height adjustments. Fitted with detachable Sstanless Steel tubular head bow and foot bow with laminated panels . Detachable full length Stainless Steel collapsible bed side railings . Stainless Steel telescopic saline rod with four locations. Provision for urine bag holder. Suitable for Mattress size 2010 mm (L) x 910 mm (W). Four rubber buffers to absorb shock in the event of impact and to prevent damage to bed. Supplied in knocked down condition. |
Hospital Bed/Iron Cot Overall approximate size:
2090 mm (L) x 910 mm (W) x 600 mm (H)
Strong and precise steel tubular frame work. Top made of double press bent CRCA sheet. Head bow 1060 mm (H) and leg bow 820 mm (H) with horizontal and vertical supports. Legs fitted with rubber shoes reinforced with MS washer inside. Provision for mosquito net poles and urine bag holder. Suitable for mattress size 1980 mm (L) x 910 mm (W). Pre treated & Epoxy Powder Coated. Supplied in knocked down condition. |  |
 | Hospital Bed (ISI) Item Code: IS5029-1979 Overall approximate size:
1975 mm (L) x 900 mm (W) X 600 M (H) + 5mm
Top made of 1.25 mm mild steel sheet on MS angle frame of size 38 mm x 38 mm x 3 mm. Bows are made of 38.10 mm dia x 1.22 mm thick ERW tubes. Head bow of 1100 + 5 mm height and leg bow 750 + 5 mm height. Both head bow and foot bow are supported horizoontally by means of 25.4 mm dia x 1.22 mm thick tube ERW tube. Head bow supported by means of 3 nos. vertical supports of 19.05 mm x 1.22 mm thick ERW tubes. Legs provided with rubber shoes (H=35xx, dia=50mm). Provision for installing mosquito net poles on the four corners of the bed. Pre treated and Epoxy powder coated. |
Ward Care Bed - Flower Position Overall approximate size:
2180 mm (L) x 910 mm (W) x 600 mm (H)
Strong and precise steel tubular frame work mounted on 100 mm dia swiveling castors, two with brakes and two without brakes. Four section top of uniformly perforated press bent CRCA sheet. Two separate screws for backrest and kneerest adjustments. Head bow 1060 mm (H) and food bow 820 mm (H). Both bows with one horizontal and three vertical supports. Four I.V. rod locations. Provision for urine bag holder. Suitable for mattress size 2070 mm (L) x 910 mm (W). Pre treated & Epoxy Powder Coated. Supplied in knocked down condition. |  |
 | Ward Care Bed - Semi Flower Position (Deluxe Model) Overall approximate size:
2070 mm (L) x 910 mm (W) x 600 mm (H)
Strong and precise steel tubular frame work mounted on 100 mm dia swiveling castors, two with brakes and two without brakes. Two section top of uniformly perforated press bent CRCA sheet. Backrest section maneuvered by crank mechanism from the foot end. Stainless steel tubular head bow at foot bow with laminated panels. Four I.V. rod locations. Provision for urine bag holder. Suitable for mattress size 2010 mm (L) x 910 mm (W). Pre treated & Epoxy Powder Coated. Supplied in knocked down condition. |
Ward Care Bed - Semi Flower Position (General Model) Overall approximate size:
2180 mm (L) x 910 mm (W) x 600 mm (H)
Strong and precise steel tubular frame work. Two section top of uniformly perforated press bent CRCA sheet. Backrest section maneuvered by crank mechanism from the foot end. Head bow 1060 mm (H) and foot bow 820 mm (H). Bow bows with one horizontal and three vertical supports. Four I.V. rod locations and legs fitted with rubber feet. Provision for urine bag holder. Suitable for mattress size 2070 mm (L) x 910 mm (W). Pre treated & Epoxy Powder Coated. Supplied in knocked down condition. |  |
 | Pediatric Bed Overall approximate size:
1480 mm (L) x 840 mm (W) x 600 mm (H)
MS sheet top. Both bows of 1060 mm (H) with one horizontal support and seven vertical supports. Mounted on heavy rubber shoes. Full length drop side railing. Provision for mosquito net poles. Suitable for mattress size 2070 mm (L) x 910 mm (W). Pre treated & Epoxy Powder Coated. Supplied in knocked down condition. |
Attendant Bed Overall approximate size:
1830 mm (L) x 610 mm (W) x 460 mm (H)
Frame work made of strong rectangular steel tubes. CRCA sheet top. Mounted on heavy rubber shoes. Pre treated & Epoxy Powder Coated. |  |
 | Metal Bunk Bed Overall approximate size:
1900 mm (L) x 900 mm (W) x 1750 mm (H)
Made of mild steel, Duly Powder Coated. |
Examination Table (ISI) Item Code: IS4787-1968 Overall approximate size:
1830 mm (L) x 510 mm (W) X 750 mm (H)
Two section top (1.22mm) of double press bent CRCA sheet. MS tubular construction. Vertical members:31.75 mm dia x 19 swg and horizontal members 25.4 mm dia x 19 swg. headrest section adjustable on ratchet mechanism for obtaining various head positions. Legs fitted with metal shoes. Pre treated and Epoxy powder coated. |  |
 | Examination Table (General) Overall approximate size:
1830 mm (L) x 510 mm (W) X 750 mm (H)
Two section top (1.22mm) of double press bent CRCA sheet. MS tubular construction. Vertical members:31.75 mm dia x 19 swg and horizontal members 25.4 mm dia x 19 swg. headrest section adjustable on ratchet mechanism for obtaining various head positions. Legs fitted with metal shoes. Pre treated and Epoxy powder coated. |
Examination Cum Gyane Table Overall approximate size:
1830 mm (L) x 610 mm (W) x 760 mm (H)
MS tubular construction. Legs fitted with rubber shoes. Two section top of double press bent CRCA sheet. Head section adjustable on ratchet. Complete with a pair of stainless steel lithotomy rods and rexine ankle straps. Perineal recess. Provision for fixing saline rod. Pre treated and Epoxy powder coated. Supplied in knocked down condition. |  |
 | Obstetric Labor Table Overall approximate size:
1870 mm (L) x 900 mm (W)x 800 mm (H)
Three section top. Backrest adjustable on ratchet. Middle section with 'U' cut and leg section can slide under the main frame. Gas spring assisted trendlenberg position. Stainless steel safety side railings fitted on head end and on both sides. Stainless steel hand grips. Rubber padded stainless steel lithotomy rods and stainless steel bowl. Adjustable stainless steel telescopic saline rod. Supplied in knocked down condition. |
|
 |
Copyright© A. M. Technologies, All Rights Reserved (Terms of Use)
